Web-based configuration
5.2 Downloading and installing the certificate
LOGO! CIM
Operating Manual, 10/2021, A5E51250518-AA
41
5.2 Downloading and installing the certificate
5.2.1 Overview
LOGO! CIM has a built-in Web-based configurator which enables you to configure the CIM
functions from a PC.
LOGO! CIM supports HTTPS for web server communication. You need to import the LOGO!
Root certificate before using HTTPS to visit CIM with browsers.
You can get the "LOGO! Root CA" in either of the following ways:
• Copy LOGO! Root CA from the DVD or LOGO!Soft Comfort installation path.
• Download LOGO! Root CA from CIM.
Copy the LOGO! Root CA
You can get the "LOGO! Root CA" in either of the following ways:
• on DVD: Windows, Linux, or MAC→ Application“_operating system version”→res
“_operating system version” is available only for Linux and Windows.
• in LOGO!Soft Comfort installation path: The LOGO!Soft Comfort installation drive (such as
C:\)→Program Files→lsc→lsc→res
Download the LOGO! Root CA from CIM
1. Set up the Ethernet communication between you PC and CIM.
Note
Make sure you connect to CIM within a secure network.
2. Open a web browser and enter "https://192.168.0.80".
3. Accept the risk notification and Click "Continue to visit the website".
4. Enter the username and password to login. The factory settings are as follow:
– User name: admin
– Password: cim
Note
After you log in the first time, you will be prompted to configure the
power on/off SMS
5. Navigate to the Security --> Certificate.
6. Select "LOGO! build in certificate".
7. Click Download.
To Next Page
Loading...
