Web-based configuration
5.3 Accessing web-based configuration from PC
LOGO! CIM
44 Operating Manual, 10/2021, A5E51250518-AA
5.3 Accessing web-based configuration from PC
To access the CIM Web-based configuration from a PC, follow these steps:
1. Ensure that the CIM and the PC are on a common Ethernet network or are connected
directly to each other with a standard Ethernet cable.
2. Open a Web browser and enter the URL "https://ww.xx.yy.zz" corresponds to the IP address
of the CIM.
3. Select the account and enter the password.
Note
The default IP address of the CIM is "https://192.168.0.80". The default password for CIM is
cim.
You can only log into web-based configuration with one browser at a time.
4. Select an appropriate language from the drop-down menu if needed.
5. Click or tap "①" to view the OSS Readme.
6. Click or tap "③" to log in to the Web server.
If you do not desire to enter the user name and password again at the next logon, you can
select the "②" check box. Make sure you do not set your browser to private mode, since
your browser does not record any browsing history or passwords in this mode.
To Next Page
Loading...
