Siemens LOGO! CIM - Certifications and Approvals Overview

Technical specifications
7.2 Certificates and approvals
LOGO! CIM
80 Operating Manual, 10/2021, A5E51250518-AA
Technical specifications - LOGO! CIM
Radiated electromagnetic field
IEC 61000-4-3
80 MHz - 1000MHz 10V/m, 80% AM
(1kHz) 1,4 GHz - 6,0 GHz 3V/m, 80% AM
(1kHz)
Conducted disturbance
IEC 61000-4-6
150 KHz-80 MHz
10 V, 80%AM(1 kHz)
Fast transient bursts
IEC 61000-4-4
• For power port: ±2kV,5kHz and
100kHz
• For signal port:
– Signal Lines<30 m: ±1 kV/5 kHz and
100 kHz
– Signal Lines>30 m: ±2 kV/5 kHz and
100 kHz
Surge immunity
• ±0.5 kV line-to-line
• ±1 kV line-to-earth
Design, dimensions and weight
Design
Compact design, for DIN rail or wall mounting
Pollution degree
IP20
Weight
200 g
Dimensions (W x H x D)
71.5 x 90 x 58.1 mm (without antenna sockets)
Materials
Plastic
7.2 Certificates and approvals
Note
Applicability
The following shows the approvals that may be available. For the device itself, it is
certificated as shown on the product label and package label.
ISO 9001 certificate
The Siemens quality management system for all production processes (Development,
Production, Sales and Service of Automation Products, -Systems and -Solutions) meets the
requirements of ISO 9001:2015
This has been certified by DQS (the German society for the certification of quality
management systems).
Certificate registration no. 001323 QM15.
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.