Siemens MAG 5100 W - Appendix H: Software Revision History; Multiranger 100

7ML19981FB05 MultiRanger 100/200 – INSTRUCTION MANUAL Page 251
mmmmm
Appendix H: Software Rev.
Appendix H: Software Revision History
MultiRanger 100
Soft-
ware
Rev.
Date Changes
1.00 08/15/2005
•Pilot Release.
1.01 09/21/2005
• Internal Release.
1.02 12/12/2001
• Initial Release.
1.03 08/27/2002
• Clarified return message for factory RS232
test.
• Prevent entering of strings with invalid fields
in Dolphin Plus.
• Properly convert ft/sec to m/sec in P654.
• Eliminated rogue watchdog resets from
repeatedly pressing hand programmer enter
while in P901-P90.
• Allow 32 bit read/write as seconds.
• Factory mode lock is written to flash.
• Cleaned up compiler errors and Lint
warnings.
• Modified handling of non-quick start
parameters.
• Modifications for Production Testing.
• Users may now configure the SmartLinx
memory map.