IP Adapter Nur für den internen Gebrauch
P31003-E8400-A100-3-7620
7-36 Service Manual
Configuration Examples
Configuring the optiPoint IPadapter (peer to peer) for connection to the U
P0E
port of
Hicom 150 E and Hicom 300E
● Configuring the IPadapter at Hicom:
1. The IP address must be configured using a telephone with display if a DHCP server is not
available when putting the IPadapter into service for the first time (see Section "Adminis-
tration via optiset E").
2. The adapter can then be accessed via the Web Client:
Figure 7-11 optiPoint IPadapter homepage
Adapter IP address
Subscriber phone
number
Hicom side
or
Optiset side
Partner IP address
(this is the IPadapt-
er IP address)
phone-side
To Next Page
Loading...
