P31003-E8400-A100-3-7620
Service Manual
7-3
Nur für den internen Gebrauch
IP Adapter
Connection to the Terminal
7.2 Connection to the Terminal
Figure 7-2 Overview: connecting an optiPoint IPadapter to the terminal
Connect the optiPoint IPadapter to the terminal in the following sequence (please also note the
diagram "Electrical connection of the optiPoint IPadapter"):
1. First of all, connect the U
P0/E
telephone via the power supply unit (A;B) to the U
P0/E
port
on the IPadapter. Use the cable supplied with the local power supply unit for this (cable
features RJ-11 Mini-Western connectors (point 1)).
2. Connect the IPadapter to the LAN network. Use the LAN network cable (max. 3 m) sup-
plied for this (cable features 3 RJ-45 Mini-Western connector (point 2)).
3. Connect the local power supply unit at the socket provided.
optiPoint
IPadapter
B
A
(A) To the terminal
(B) To IPadapter
AB
1
2
To Next Page
Loading...
