P31003-E8400-A100-3-7620
Service Manual
7-31
Nur für den internen Gebrauch
IP Adapter
Configuration Examples
7.6 Configuration Examples
Configuring the optiPoint IPadapter (peer to peer) for connection to HG 1500
(Xpress@LAN) with Hicom 150 Office
Configuring the IPadapter at Hicom:
1. The IP address must be configured using a telephone with display if a DHCP server is not
available when putting the IPadapter into service for the first time (see Section "Adminis-
tration via optiset E").
2. The adapter can then be accessed via the Web Client:
>
When you restart the computer, the IPadapter is set to "phone-side" by default as on
optiPoint 500.
To Next Page
Loading...
