La beli ng, Documentat ion and Acce ssori es
96
Labeling, Documentation and Accessories
Labeling Key Fields
Key labeling sheets containing pre-cut cards are supplied with each tele-
phone and key module in an accessory pack. These cards can be used on
both sides, and are inserted into the telephone.
To label the fixed function keys
Æ page 3, punch out the small pre-
p rinted labeling card. Insert the card
and cover it with the plastic foil sup-
plied (matt side up), as shown in the
drawing.
Use one large card for labeling the
programmable keys Æ page 3.
Punch out the card, write down the
stored functions and/or station
numbers (in the white area), inser t
it, and cover it with the plastic foil
supplied (matt side up), as shown in
the drawing.
Labeling Key Fields Using the PC
If you have the user instructions for your HiPath 3000/HiPath AllServe on
CD Æ page 97, you can label keys conveniently at the PC.
Attaching a Station Number Label
A sheet with station number labels is supplied with each telephone.
Fill out the label (fire, police, your own station number) and punch it out.
Lift the handset and attach the label in the recess of the telephone.
If you are using the "dual key assignment" function Æ page 52, use
the back of the large card for labeling or assigning the two levels.
Use the plastic foil with the narrow strips as a protective cover.
To Next Page
Loading...
