Siemens PM-D F DC24V PROFIsafe - Page 220

Index
ET 200S Distributed I/O System - Fail-Safe Modules
220 Installation and Operating Manual, 08/2008, A5E00103686-07
Causes of faults
EM 4 F-DI/3 F-DO DC24V PROFIsafe,
158
EM 4 F-DO DC24V/2A PROFIsafe,
173
EM 4/8 F-DI DC24V PROFIsafe,
131
PM-D F DC24V PROFIsafe,
102
PM-E F pm DC24V PROFIsafe,
77
PM-E F pp DC24V PROFIsafe,
91
CE approval,
49
Changes
in this manual,
3
Channel
deactivated,
41
Channel fault,
42
Channel group fault,
41
Channel-specific diagnostics
from byte 8 in diagnostic data,
194
of F-modules,
45
Climatic conditions
permitted,
59
Commissioning
the ET 200S,
18
Communication error,
36, 46
EM 4 F-DI/3 F-DO DC24V PROFIsafe,
157
EM 4 F-DO DC24V/2A PROFIsafe,
172
EM 4/8 F-DI DC24V PROFIsafe,
130
PM-D F DC24V PROFIsafe,
101
PM-E F pm DC24V PROFIsafe,
76
PM-E F pp DC24V PROFIsafe,
91
Reaction of the F-DI module,
43
Conditions
for safety class with EM 4 F-DI/3 F-DO DC24V
PROFIsafe,
137, 145
for safety class with EM 4 F-DO DC24V/2A
PROFIsafe,
163
for safety class with EM 4/8 F-DI DC24V
PROFIsafe,
105
For safety class with EM 4/8 F-DI DC24V
PROFIsafe,
114
for safety classes with PM-D F DC24V
PROFIsafe,
97
of use,
57
Shipping and storage of F-modules,
57
Conditions of use,
57
Configuration
ET 200S with fail-safe modules,
19
ET 200S with fail-safe motor starters,
20
Configuration example
Potential group,
19
with fail-safe motor starters,
20
Configuration rules
Fail-safe potential groups,
20
Configuring
F-modules,
26
Connecting
two relays on one digital output,
72
Connecting capacitive loads,
74, 145, 171
Connecting potentials
additional,
21
Conventions
in this manual,
6
Corrective measures
PM-D F DC24V PROFIsafe,
102
Corrective Measures
EM 4 F-DI/3 F-DO DC24V PROFIsafe,
158
EM 4 F-DO DC24V/2A PROFIsafe,
173
EM 4/8 F-DI DC24V PROFIsafe,
131
PM-E F pm DC24V PROFIsafe,
77
PM-E F pp DC24V PROFIsafe,
91
Cross circuit
EM 4 F-DO DC24V/2A PROFIsafe,
169
PM-E F pm DC24V PROFIsafe,
72
CSA Approval,
50
cULus approval,
50
Current carrying capacity
maximum,
25
D
Dark period
for actuators,
38
Deactivated channel,
41
Determining the parameter length
F-modules,
25
Determining the parameter length,
25
Diagnostic data
Byte 7 for PM-D F DC24V PROFIsafe,
193
Byte 7 on EM 4 F-DI/3 F-DO DC24V
PROFIsafe,
192
Byte 7 on EM 4 F-DO DC24V/2A PROFIsafe,
192
Byte 7 on EM 4/8 F-DI DC24V PROFIsafe,
192
Byte 7 on PM-E F pm DC24V PROFIsafe,
193
Byte 7 on PM-E F pp DC24V PROFIsafe,
193
Bytes 0 and 1,
190
Bytes 2 and 3,
191
Bytes 4 to 6,
191
Position in the message frame,
189
Structure and content,
190
diagnostic functions
Reading out,
47