[sc_7SR5_CurrentMetersDisplay, 1, --_--]
Figure 6-1 Current Meters Display
The Main Menu > Instruments > Current Meters menu displays the real-time measured current from
analogue current inputs with primary and secondary values (by pressing the â–¼ button to see the secondary
values).
Instruments from Reydisp Manager 2 (Relay Monitor Tool)
The Relay Monitor Tool displays a real time list of instruments from a device. Real time analogue values
measurement requires a device to be connected to a PC using a USB or rear ethernet port for data to be trans-
ferred to the PC online.
If there is a communication connection to systems control, measured values that the operational crew can
verify are also transmitted here by rear ethernet communication.
The device is able to indicate the measurand values from Reydisp Manager 2 software with connection by
COM-2 using the front USB port which has the IP address 192.168.2.1. or user configured IP address from the
rear ethernet ports (Electrical or LC optical).
In order to access the online monitor tool, click the Instrument Monitor box on the Reydisp Manager 2
Startup screen.
Commissioning
6.2 Initial Startup
Reyrolle 7SR5, Operating, Manual 81
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
