[sc_7SR5_InstrumentMonitor, 1, --_--]
Figure 6-2 Opening the Relay Monitor Tool
The user should click on the Create New Connection button at the top of window.
The IP address 192.168.2.1 should be typed for the USB front port connection or user defined IP address for
the rear ethernet port connection to the IP Address box.
The user can then click the Create button and select connection, then click the Connect button to open the
Relay Monitor Tool.
Commissioning
6.2 Initial Startup
82 Reyrolle 7SR5, Operating, Manual
C53000-B7040-C013-1, Edition 05.2021
To Next Page
Loading...
