Certification
6
The RUGGEDCOM RSG2488 device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
Note
Certifications related to individual modules are detailed in the RUGGEDCOM Modules
Catalog for the device available online.
6.1 Approvals
The following details the approvals issued for the RUGGEDCOM RSG2488.
6.1.1 TÜV SÜD
This device is certified by TÜV SÜD to meet the requirements of the following
standards:
• CSA/EN/IEC/UL 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements)
6.1.2 European Union (EU)
This device is declared by Siemens AG to comply with essential requirements and
other relevant provisions of the following EU directives:
• EN 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements
• EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
• EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
• EN 55022
Information Technology Equipment – Radio disturbance characteristics – Limits
and methods of measurement
RUGGEDCOM RSG2488
Installation Manual, 07/2021, C79000-G8976-1048-11
37
To Next Page
Loading...
Need help?
General