Display choices
Heating to the Comfort setpoint
Holiday function active
Heating to Reduced setpoint
Reference to heating circuit
Heating to the frost protection setpoint
Service / special functions
Cooling
Error messages
Process running – please wait
Info level activated
Change battery
Programming activated
Heating temporarily switched
off
ECO function active
Display of all segments.
Display
2358Z07
Xxxxxxxxxxxxxxxxxxxxxxxxxxx
Xxxxxxxxxxxxxxxxxxxxxxxxxxx
Xxxxxxxxxxxxxxxxxxxxxxxxxxx
Selecting pace heating mode
This button is
used to switch between the different
operating modes. The selection made is indicated by a
bar which appears below the respective symbol.
Automatic mode
In automatic mode, the room temperature is controlled in accordance with the time
program.
Characteristics of automatic mode:
− Heating mode according to the time program
− Temperature setpoints per heating program "Comfort setpoint" or "Reduced
setpoint"
− Protective functions active
− Automatic summer / winter changeover and automatic 24-hour heating limit active
(ECO functions)
Continuous operation
or
Continuous operation maintains the room temperature at the selected operating level.
Heating to the Comfort setpoint
Heating to Reduced setpoint
Characteristics of continuous operation:
• Heating with no time program
• Protective functions active
• Automatic summer / winter changeover (ECO functions) and automatic 24-hour
heating limit inactive in the case of continuous operation with Comfort setpoint
38/258
Siemens Switzerland Ltd User manual RVS61.843, RVS41.813 CE1U2355en_02
HVAC Products 5 Handling 28. September 2009
To Next Page
Loading...
