5.1.4 Overview of the settings
The table below shows all available settings up to the heating engineer level. Certain
operating lines may be hidden, depending on the unit version used.
E = End-user
I = Commissioning
F = Heating engineer
ST = Can only be set via ACS700 service tool
OL = Operating line
1)
Only QAA75../78..
Only RVS41..
Only RVS61..
Operating
line
Operating
level
Function
Default value
Min
Max
Unit
Time of day and date
1 E Hours/minutes - 00:00 23:59 hh:mm
2 E Day / month - 01.01 31.12 dd.MM
3 E Year - 2004 2099 yyyy
5 F Start of summertime 25.03 01.01 31.12 dd.MM
6 F End of summertime 25.10 01.01 31.12 dd.MM
Operator section
20 E Language
German ¦ …
German -
22 F Info
Temporarily ¦ Permanently
Temporarily -
26 F Operation lock
Aus ¦ Ein
Off. -
27 F Programming lock
Aus ¦ Ein
Off. -
28 I Direct adjustment
Automatic storage ¦ Storage with confirmation
Storage with confirmation
40 I
Used as
Room unit 1 ¦ Room unit 2 ¦ Room unit P ¦ Operator unit 1 ¦
Operator unit 2 ¦ Operator unit P ¦ Service unit
Room unit 1 -
42 I Assignment device 1
Heating circuit 1 ¦ Heating circuits 1 and 2 ¦ Heating circuits
1 and P ¦ All heating circuits
Heating circuit 1 -
44 I Operation HC2
Commonly with HC1 ¦ Independently
Commonly with HC1 -
46 I Operation HCP
Commonly with HC1 ¦ Independently
Commonly with HC1 -
48 I Action occupancy button
None ¦ Heating circuit 1 ¦ Heating circuit 2 ¦ Commonly
Heating circuit 1 -
54 F Readjustment room sensor 0.0 -3 3 °C
70 F
Software version
- 0 99.9 -
Radio links
120 I Binding
No ¦ Yes
No -
121 I Test mode
Aus ¦ Ein
Off. -
130 I Room unit 1
Missing ¦ Ready ¦ No recept’n ¦ Change batt
- -
131 I Room unit 2
Missing ¦ Ready ¦ No recept’n ¦ Change batt
- -
Key
1)
1)
46/258
Siemens Switzerland Ltd User manual RVS61.843, RVS41.813 CE1U2355en_02
HVAC Products 5 Handling 28. September 2009
To Next Page
Loading...
