Siemens RVS41.813 - Page 71

Operating line Operating level Function Default value Min Max Unit
7152 I Triggering defrost
No ¦ Yes
No -
I Phone no. responsibility 1 0 16 7181 digits
7183 I Phone no. responsibility 2 0 16 digits
Input / output test
7700 I Relay test
No test ¦ Everything off ¦ Relay output QX23 module 1 ¦
Relay output QX21 module 1 ¦ Relay output QX22 module
1 ¦ Relay output QX1 ¦ Relay output QX2 ¦ Relay output
QX3 ¦ Relay output QX4 ¦ Relay output QX5 ¦ Relay output
QX6 ¦ Relay output QX23 module 2 ¦ Relay output QX21
module 2 ¦ Relay output QX22 module 2 ¦ Relay output
QX7 ¦ Relay output QX8
No test -
4)
7700
I Relay test
No test ¦ Everything off ¦ Source pump Q8 / Fan K 19 ¦
Compressor 1 K1 (for approx. 1-2 s) No test ¦ Everything
off ¦ Source pump Q8/fan K19 ¦ Compressor 1 K1 ¦
Condenser pump Q9 ¦ DHW pump Q3 ¦ Heating circuit
pump Q2¦ Heat circ mix valve op Y1¦ Heat circ mix valve cl
Y2 ¦ Relay output QX23 module 1 ¦ Relay output QX21
module 1 ¦ Relay output QX22 module 1 ¦ Relay output
QX1 ¦ Relay output QX2 ¦ Relay output QX3 ¦ Relay output
QX4 ¦ Relay output QX5 ¦ Relay output QX6 ¦ Relay output
QX23 module 2 ¦ Relay output QX21 module 2 ¦ Relay
output QX22 module 2
No test -
6)
Output test UX
− − − − − − / 0 7710 I 100 %
7711 I Voltage signal UX - 0.0 10.0 Volt
7714 I PWM signal P1 - 0 100 %
7730 I Outside temp B9 - -50.0 50.0 °C
7732 I Flow temp B1 - 0.0 140.0 °C
7750 I DHW temp B3 - 0.0 140.0 °C
7770 Flow temp HP B21 - 0.0 140.0 °C I
7771 I Return temp HP B71 - 0.0 140.0 °C
7772 I Hot-gas temp B81 - 0.0 180.0 °C
I Source inlet temp B91 - -50.0 50.0 7775 °C
7777 I Sensor temp B92, B84 - -50.0 50.0 °C
7820 I Sensor temp BX1 - -28 350 °C
7821 I Sensor temp BX2 - -28 350 °C
7822 I Sensor temp BX3 - -28 350 °C
7823 I Sensor temp BX4 - -28 350 °C
7824 I Sensor temp BX 5 - -28 350 °C
7830 I Sensor temp BX21 module 1 - -28 350 °C
7831 I Sensor temp BX22 module 1 - -28 350 °C
7832 I Sensor temp BX21 module 2 - -28 350 °C
7833 I Sensor temp BX22 module 2 - -28 350 °C
0.0 10.0 7840 I Voltage signal H1 - Volt
7841 I Contact state H1
Open ¦ Closed
- 0 1 -
7842 I Pulse counter H1 - 0 66535 -
7845 I Voltage signal H2 - 0.0 10.0 Volt
7846 I Contact state H2
Open ¦ Closed
- 0 1 -
7854 I Voltage signal H3 - 0.0 10.0 Volt
7855 I Contact state H3
Open ¦ Closed
- 0 1 -
6)
6)
71/258
Siemens Switzerland Ltd User manual RVS61.843, RVS41.813 CE1U2355en_02
HVAC Products 5 Handling 28. September 2009