Siemens S7-200 - Page 34

Technical Data
Micro Automation Set 14 Entry ID 21062588
V2.0 05/18/05 34/35
Copyright © Siemens AG 2005 All rights reserved
Set14_DocTech_V2.0_en.doc
Ethernet CP 443-1 expansion module
Table 6-9
Criterion Technical data Additional note
Supply voltage DC 24V
Current consumption 220 mA
Interfaces
• Connection to Industrial
Ethernet
– 1x RJ45
– 1x AUI
Transfer rate 10/100 Mbit/s (auto-sensing)
Dimensions (W x H x D) 25 x 290 x 210
WinAC “Backup”
Technical data and information on the WinAC “Backup” station.
LOGO!Power 4A
Table 6-10
Criterion Technical data Additional note
Supply voltage AC 100-240V Wide-range setting
Output voltage DC 24V
Output current 4 A
Dimensions (W x H x D) in
mm
90 x 90 x 55
SIMATIC MicroBox PC 420
Table 6-11
Criterion Technical data Additional note
Supply voltage DC 24V
Current consumption
Processor
Celeron 400MHz, 100MHz
FSB,Profibus DP12
Configurable
Memory configuration
512MBYTE SDRAM-133
(1x512MB)
Configurable
Drives 1 GB Compact Flash Configurable
Operating system
Windows XP embedded
preinstalled
Configurable
Interfaces
• Connection to Industrial
Ethernet
– 2x RJ45
Various other ports available
Dimensions (W x H x D) in
mm
262 x 134 x 47