Fields of Application and Benefit
Micro Automation Set 14 Entry ID 21062588
V2.0 05/18/05 5/35
Copyright © Siemens AG 2005 All rights reserved
Set14_DocTech_V2.0_en.doc
Automation solution – Set 14
The automation solution uses an S7-200 controller¹ with clock cartridge for
acquisition of the process data and for generating a time stamp. The data
records are sent cyclically from the S7-200 controller to a control center²
connected via Ethernet and archived in this control center.
An S7-200, S7-300, S7-400 or a WinAC station are used as alternative
control centers². The archive data of the control center² can be accessed
with WinCC flexible. SCALANCE X108 enables access from the
automation or office network to the individual controllers.
¹ Referred to as “Basis” station in the following
² Referred to as “Backup” station in the following
M
LOGO!
Power
SIMATIC S7-
200
CP 243-
1
SCALANCE
X108
WinAC station S7-400 station S7-300 station
Facility
management
Production
management
(SIMATIC IT)
Further
areas
S7-200 station
WinCC flexible
Office network
To Next Page
Loading...
