Description
3.2 Product properties
SCALANCE W-784-1xx / SCALANCE W-74x-1
60 Operating Instructions (Compact), Release 08/2007, A5E01174713-02
The following table shows the characteristics of the various model variants of the
SCALANCE W784-1xx / W74x-1:
Type Number of
WLAN ports
Number of
supported IP nodes
Number of
supported MAC
nodes
iPCF mode
(1)
Order No.
W784-1 1 several several No 6GK5784-1AA30-2AA0
6GK5784-1AA30-2AB0
(2)
W784-1RR 1 several several Yes 6GK5784-1AA30-6AA0
6GK5784-1AA30-6AB0
(2)
W744-1 1 1 1 No 6GK5744-1AA30-2AA0
6GK5744-1AA30-2AB0
(2)
W746-1 1 8 8 No 6GK5746-1AA30-4AA0
6GK5746-1AA30-4AB0
(2)
W747-1 1 8 8 Yes 6GK5747-1AA30-6AA0
6GK5747-1AA30-6AB0
(2)
(1) The iPCF mode provides an optimized data throughput and minimum handover times.
(2) US variant
Requirements for installation and operation
A PG/PC with a network attachment must be available to configure the SCALANCE W784-
1xx / W74x-1. If no DHCP server is available, a PC on which the Primary Setup Tool (PST)
is installed is necessary for the initial assignment of an IP address to the SCALANCE W784-
1xx / W74x-1. For the other configuration settings, a computer with Telnet or an Internet
browser is necessary.
To Next Page
Loading...
Need help?
General
