Configuration Using Web Based Management and the Command Line Interface
C79000-G8976-C184-07
125
CLI\SYSTEM\SNMP\GROUP>
scription Comment Command De
add <Name>
[NOAUTH|AUTH|PRIV]
Adds an SNMPv3 group. NOAUTH –
No authentication, no encryption;
H - Authentication with MD5 or
algorithm, no encryption.
Write access without read
access is not possible.
[R|W]
AUT
SHA
PRIV - Authentication with MD5 or
SHA algorithm and encryption with
the DES3 algorithm.
R – Read access;
W - Write access
edit <Index
[NOAUTH|AUTH|PRIV]
[RE|RD|
y level of the
hts.
ws write access;
es write access;
You cannot edit the
authentication and
encryption settings unless
the group is empty.
Preventing read access
also prevents write
access.
Permitting write access
also permits read access.
>
Changes the securit
group and sets the access rig
WE|WD]
You can view of the index of the
group with the "info“ command.
RE – allows read access;
RD – denies read access;
WE – allo
WD – deni
delete <Ind
roup from the
ition.
Is only possible to delete
a group if it is empty.
ex>
Deletes the SNMPv3 g
group list at the index pos
clearall
at are
Clears all SNMP groups th
empty.
Operating Instructions SCALANCE W78x
To Next Page
Loading...
