Description
3.4 Description of the product
SCALANCE X-400
52 Operating Instructions, 06/2015, C79000-G8976-C186-12
● MM492-2LH (1000 Mbps)
order number: 6GK5 492-2AN00-8AA2
Note
This media module can be used with the SCALANCE X414
-3 as of product version 05.
This media module is recognized by the SCALANCE X414
-3E and SCALANCE X408-2
only as of firmware version 2.2.0.
● MM492-2LH+ (1000 Mbps)
order number: 6GK5 492-2AP00-8AA2
Note
This media module can be used with the SCALANCE X414
-3 as of product version 05.
This media module is recognized by the SCALANCE X414
-3E and SCALANCE X408-2
only as of firmware version 2.2.0.
● MM492-2ELH (1000 Mbps)
order number: 6GK5 492-2AQ00-8AA2
Note
This media module can be used with the SCALANCE X414
-3 as of product version 05.
This media module is recognized by the SCALANCE X414
-3E and SCALANCE X408-2
only as of firmware version 3.0.
By using media modules, you can increase the number of available ports in the basic device
SCALANCE X414-3E from 14 to 18. Four Fast Ethernet fiber-optic ports are available at the
same time on slots 6 and 7. On slot 5, two gigabit fiber-optic ports are also possible instead
of TP cable.
The use of media modules does not change the number of available ports in the SCALANCE
X408-2 basic device. On 4 ports, data transmission is also possible over fiber-optic cable
instead of TP cable.
To Next Page
Loading...
