Top view of the 100 to 240 VAC / 110 to 250 VDC device versions
Figure 10-3 Depth
10.2 Mounting brackets for use on ships
You need special mounting brackets to install the device horizontally on a ship.
Below you will nd the design drawing for making the mounting brackets.
You will nd the more information on the construction of the mounting brackets in the section
"Technical specications (Page 81)".
Note
ISO tolerance and punching burr
For dimensions without tolerance details, the general tolerances "medium" acc. to DIN ISO 2768
apply. No punching burrs are permitted.
Dimension drawings
10.2 Mounting brackets for use on ships
SCALANCE XRH-300/XRM-300
98 Equipment Manual, 10/2022, C79000-G8976-C546-01
To Next Page
Loading...
