3.5.3.3 Summation current transformer Rc CT
Residual currents of 3A to 30A can be measured with a summation current transformer and
evaluated by electronic trip units of the 6-series, which is equipped with a rating plug for residual
current protection and the metering function MF Advanced. The transformer is connected to the
auxiliary conductor terminal system of the circuit breaker.
T7 Summation current transformer
3.5.4 Locking and interlocking
Covers and locking provisions to prevent mechanical operations at the operator panel
① Protective covers to prevent unintended mechanical operation
② Locking provision, OFF position, Ronis lock
③ Interlocking set for mechanical ON and/or OFF, for padlocks
④ Locking provision, OFF position, for padlocking
Accessories
3.5External accessories
3VA27 molded case circuit breakers & 3WL10 air circuit breakers
Equipment Manual, 10/2023, L1V30499596002-03 115