① Fixed-mounted breaker
② Withdrawable breaker
Because the circuit breaker is designed for up to two communications modules, it can be
integrated into the communication environment with two dierent protocols. For example,
simultaneous connection of a eldbus for automation or remote control applications (incl.
parameterization and remote switching) and Modbus TCP Ethernet communication link for
communicating measured values for ecient and safe power monitoring.
For the remote control switch of the 3VA27, you require the version of the stored energy
mechanism to be able to connect the device via the closing coil / shunt trip and Com Act
when the spring is charged. The automatic spring charging motor is recommended for this.
(Info: Opening the circuit breaker is always possible even when the spring is not charged.)
Communication applications
• Parameterization and conguration
– With the powercong software (as of Version 3.9)
• Energy management
– Metering function MF Basic / MF Advanced
– Remote access and remote switching
– Integration in powermanager and TIA
Description
2.10Communication
3VA27 molded case circuit breakers & 3WL10 air circuit breakers
82 Equipment Manual, 10/2023, L1V30499596002-03
To Next Page
Loading...
