ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
3
Preface
Purpose of this Manual
The information in this manual is a reference source for operations, function descriptions,
and technical specifications of the fail-safe modules of the ET 200S distributed I/O system.
Basic Knowledge Requirements
This manual is a supplement to the
ET 200S Distributed I/O System
manual. Working with
this manual requires general knowledge of automation engineering. You also require
experience of using the
STEP 7
basic software and the ET 200S distributed I/O system.
Scope of this Manual
Module Order Number Release Number
and Higher
Power module PM-E F pm DC24V PROFIsafe 6ES7138-4CF03-0AB0 01
Power module PM-E F pp DC24V PROFIsafe 6ES7138-4CF42-0AB0 01
Power module PM-D F DC24V PROFIsafe 3RK1903-3BA02 01
Digital electronic module 4/8 F-DI DC24V
PROFIsafe
6ES7138-4FA04-0AB0 01
Digital electronic module 4 F-DI/3 F-DO DC24V
PROFIsafe
6ES7138-4FC01-0AB0 01
Digital electronic module 4 F-DO DC24V/2A
PROFIsafe
6ES7138-4FB03-0AB0 01
Digital electronic module
1 F-RO DC24V/AC24..230V/5A
6ES7138-4FR00-0AA0 01
What's New
Compared with the previous version, this manual includes the following major
changes/additions:
● Simplified configuration rules
● Revised behavior of the electronic outputs in the event of a short-circuit
● Revised behavior in the event of a voltage dip
To Next Page
Loading...
Need help?
General
