EasyManuals Logo

Siemens SIMATIC ET 200S Installation And Operating Manual

Siemens SIMATIC ET 200S
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
General Technical Specifications
6.4 Shipping and Storage Conditions
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
57
6.4 Shipping and Storage Conditions
Requirements for Fail-Safe Modules
Fail-safe modules surpass the requirements for transport and storage conditions defined in
IEC 61131, Part 2. The following specifications apply for fail-safe modules that are
transported and stored in the original packaging.
Type of Condition Permissible Range
Free fall ≤ 1 m
Temperature From –40 °C to +70 °C
Temperature variation 20 K/h
Air pressure 1080 hPa to 660 hPa
(corresponds to an altitude of -1000 m to 3500 m)
Relative humidity 5% to 95%, no condensation
6.5 Mechanical and Climatic Environmental Conditions
Conditions of Use
The F-modules are intended for use as stationary installations in sheltered locations. The
conditions of use surpass the requirements in accordance with IEC 61131-2.
Fail-safe modules comply with conditions of use Class 3C3 in accordance with DIN EN
60721 3-3 (use in locations with heavy traffic and in the immediate vicinity of industrial
systems with chemical emissions).
Restrictions
F-modules cannot be implemented without additional measures being taken:
In locations with a high level of ionizing radiation
In locations with severe operating conditions, due for example to:
Dust
Corrosive vapors or gases
In systems which require special monitoring, such as:
Electrical systems in particularly hazardous areas
An additional measure for the implementation of fail-safe modules can be installing the
ET 200S in cabinets, for example.

Table of Contents

Other manuals for Siemens SIMATIC ET 200S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC ET 200S and is the answer not in the manual?

Siemens SIMATIC ET 200S Specifications

General IconGeneral
BrandSiemens
ModelSIMATIC ET 200S
CategoryI/O Systems
LanguageEnglish

Related product manuals