Siemens SIMATIC ET 200S Installation And Operating Manual

Wiring and Fitting Modules
4.5 Requirements for Sensors and Actuators
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
39
See also
Using ET 200S Fail-Safe Modules (Page 14)
Assignment of the PROFIsafe address (Page 29)
Technical Specifications for PM-E F pm 24 VDC PROFIsafe (Page 78)
Technical Specifications for the PM-E F pp 24 VDC PROFIsafe (Page 93)
Technical Specifications of the PM-D F DC24V PROFIsafe (Page 103)
Applications for the 4/8 F-DI DC24V PROFIsafe Electronic Module (Page 113)
Technical Specifications of the EM 4/8 F-DI DC24V PROFIsafe (Page 133)
Input applications of EM 4 F-DI/3 F-DO DC24V PROFIsafe (Page 145)
Technical specifications of the EM 4 F-DI/3 F-DO DC24V PROFIsafe (Page 159)
Technical Specifications of the EM 4 F-DO DC24V/2A PROFIsafe (Page 174)
Technical specifications of the EM 1 F-RO DC24V/AC24..230V/5A (Page 184)

Siemens SIMATIC ET 200S Specifications

General

Brand	Siemens
Model	SIMATIC ET 200S
Category	I/O Systems
Language	English