Using the SSI_Absolute_Encoder technology object
4.7 SSI_Absolute_Encoder diagnostics
Counting, measurement and position detection
168 Function Manual, 12/2017, A5E32009889-AG
The following values are read by the technology object from the feedback interface and
displayed:
● Event display/diagnostics information
● Signal states of the digital inputs and digital outputs
● Position value
● Capture value
● Measured value
Additional information on status displays is available in the context-sensitive help for each
event in STEP 7 (TIA Portal). When the CPU is in STOP, the status display is not updated.
To Next Page
Loading...
