Siemens SIMATIC ET 200SP - Parameters; AI Energy Meter HF Parameters

Using the High_Speed_Counter technology object
3.5 Configuring the High_Speed_Counter
Counting, measurement and position detection
96 Function Manual, 12/2017, A5E32009889-AG
3.5
Configuring the High_Speed_Counter
3.5.1
Working with the configuration dialog
You configure the properties of the technology object in the configuration window. Proceed
as follows to open the configuration window of the technology object:
1. Open the "Technology objects" folder in the project tree.
2. Open the technology object in the project tree.
3. Double-click on the "Configuration" object.
The configuration is divided into the following categories:
●
Basic parameters
The basic parameters include the selection of the technology module and the number of
the counting channel for which the technology object is configured.
●
Extended parameters
The extended parameters include the parameters for adapting the counting and
measuring functions and for setting the characteristics of the digital inputs and digital
outputs.