Using the High_Speed_Counter technology object
3.5 Configuring the High_Speed_Counter
Counting, measurement and position detection
Function Manual, 12/2017, A5E32009889-AG
97
Configuration window icons
Icons in the area navigation of the configuration show additional details about the status of
the configuration:
The configuration contains default values and is complete
.
The configuration contains only default values. With these default values, you can use the technology object without
The configuration contains values set by the user or
automatically adapted values and is complete
All text boxes of the configuration contain valid values and at least one default value was changed.
The configuration is incomplete or incorrect
At least one text box or drop-down list contains an invalid value. The corresponding field or the drop-down list is dis-
played on a red background. Click the roll-out error message to indicate the cause of error.
To Next Page
Loading...
