Siemens SIMATIC ET 200SP - Preface

Counting, measurement and position detection
Function Manual, 12/2017, A5E32009889-AG
3
Preface
Purpose of the documentation
This documentation supports you in configuring and programming modules for counting and
measurement tasks of the S7-1500, ET 200MP and ET 200SP, as well as in position
feedback and position input.
Basic knowledge required
The following knowledge is required in order to understand the documentation:
● General knowledge of automation technology
● Knowledge of the industrial automation system SIMATIC
● Knowledge about the use of Windows-based computers
● Proficiency with STEP 7
Validity of the documentation
This documentation applies to the use of the following modules:
● S7-1500 modules
– TM Count 2x24V
– TM PosInput 2
– TM Timer DIDQ 16x24V
– CPU 1511C-1 PN
– CPU 1512C-1 PN
– DI 32x24VDC HF (as of firmware version V2.1.0)
– DI 16x24VDC HF (as of firmware version V2.1.0)
● ET 200SP modules
– TM Count 1x24V
– TM PosInput 1
– TM Timer DIDQ 10x24V
– DI 8x24VDC HS
TM Count, TM PosInput and compact CPU are suitable for complex counting and measuring
tasks and for position detection. TM Timer DIDQ and digital input modules are suitable for
simple counting tasks.