EasyManuals Logo

Siemens SIMATIC HMI TP700 Comfort User Manual

Siemens SIMATIC HMI TP700 Comfort
250 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
Commissioning a project
5.8 Managing add-ons and license keys
Comfort Panels
170 Operating Instructions, 07/2017, A5E36770603-AB
5.8
Managing add-ons and license keys
5.8.1
Managing add-ons
Introduction
You can install the following add-ons on an HMI device:
Add-ons supplied with WinCC
Add-ons purchased separately from WinCC
The HMI device type determines which add-ons can be installed.
For an overview of available add-ons, refer to "Introduction to WinCC".
Requirement
The HMI device is connected to the configuration PC.
The PG/PC interface is set.
The HMI device is selected in the project tree.
The HMI device is switched on.
Procedure
To install an add-on on the HMI device, follow these steps:
1. Select the "Options" command in the "Online > HMI device maintenance" menu.
All available add-ons and those already installed are shown.
2. You may also click "Device status" to display the add-ons installed on the HMI device.
3. To install an add-on on the HMI device, select the add-on and use ">>" to transfer it to the
list of installed add-ons.
4. Click "<<" to remove an add-on from the HMI device.
5. To start the installation or removal, click "OK".
Result
The selected add-ons have been installed on the HMI device or removed from the HMI
device.
See also
Transferring license keys (Page 171)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC HMI TP700 Comfort and is the answer not in the manual?

Siemens SIMATIC HMI TP700 Comfort Specifications

General IconGeneral
Display Size7 inches
Resolution800 x 480 pixels
Power Supply24 V DC
Number of Colors16 million
Brightness400 cd/m²
TouchscreenYes, analog resistive
Flash Memory12 MB
Protection RatingIP65 (front)
Display TypeTFT
Protection ClassClass III
Memory1 GB Flash
Storage12 MB Flash
Weight1.2 kg
Power Consumption12 W
Interfaces1x Ethernet (RJ45), 2x USB, 1x RS422/RS485

Related product manuals