Name: Siemens SIMATIC HMI TP700 Comfort
Brand: Siemens
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Commissioning the device

4.3 Parameter assignment for Comfort Panel

Comfort Panels

74 Operating Instructions, 07/2017, A5E36770603-AB

4.3

Parameter assignment for Comfort Panel

4.3.1

Desktop and Start Center

Once the HMI device has been started, the display shows the desktop.

①

Desktop

②

Start Center

③

Start menu

④

Icon for screen keyboard

The Start Center

The Start Center buttons have the following function:

● Transfer – You switch the HMI device to "Transfer" mode.

The transfer is only activated if at least one data channel has been parameterized, see

section "Configuring transfer (Page 96)".

● Start – You start the project on the HMI device.

If you do not perform an operation, a project already loaded on the HMI device will start

automatically in line with the settings in the Control Panel . If no project is loaded, the

Start Center will activate the transfer.

● Settings – You start the Control Panel.

See section "Overview of functions (Page 78)".

● Taskbar – You open the task list and the Start menu.

The Start Center is displayed again if a project on the HMI device has been closed or if it is

accessed from the project.

Siemens SIMATIC HMI TP700 Comfort Specifications

General

Siemens SIMATIC HMI TP700 Comfort User Manual

Questions and Answers: