Siemens SIMATIC HMI TP700 Comfort User Manual

Commissioning the device
4.1 Overview
Comfort Panels
66 Operating Instructions, 07/2017, A5E36770603-AB
The following description uses a Comfort V1 device with a ≥7" display diagonal as an
example.
1. Slide the safety catch into the required position.
2. To remove the memory card and/or system memory card, briefly press the card in
question.
The card will be released and can be removed. This step is not required during
commissioning.
3. Insert the new memory card and/or system memory card.
4. Slide the safety catch back into its original position.
When you have inserted the system memory card, you will be prompted by the HMI
device to enable the "Automatic Backup" function.
The memory card and/or system memory card is replaced.
See also
Accessories (Page 22)
Using automatic backup (Page 146)

Siemens SIMATIC HMI TP700 Comfort Specifications

General

Display Size	7 inches
Resolution	800 x 480 pixels
Power Supply	24 V DC
Number of Colors	16 million
Brightness	400 cd/m²
Touchscreen	Yes, analog resistive
Flash Memory	12 MB
Protection Rating	IP65 (front)
Display Type	TFT
Protection Class	Class III
Memory	1 GB Flash
Storage	12 MB Flash
Weight	1.2 kg
Power Consumption	12 W
Interfaces	1x Ethernet (RJ45), 2x USB, 1x RS422/RS485