iii
ET 200S Interface Module IM 151/CPU
A5E00058783-01
Important Information
Purpose of the Manual
This manual supplements the
ET 200S Distributed I/O System
manual. It
describes all the functions of the IM 151/CPU interface module. The manual does
not deal with general ET 200S functions. You will find descriptions of these in the
ET 200S Distributed I/O System
manual (see also the section entitled ”Delivery
Package”).
The information contained in this manual and in the
ET 200S Distributed I/O
System
manual will enable you to operate the ET 200S with the IM 151/CPU
interface module as a DP slave on the PROFIBUS-DP or in a stand-alone
configuration.
Target Group
The manual describes the hardware of the IM 151/CPU interface module and is
aimed at configuration engineers, commissioning engineers and maintenance
personnel who use the ET 200S with PLC functionality.
It consists of chapters containing instructions and reference chapters.
Delivery Package
This delivery package (order number 6ES7 151-1AA00-8BA0) consists of three
manuals, with contents as follows:
IM 151/CPU Interface Module
Installing and wiring the
ET 200S
Commissioning and
diagnostics of the ET 200S
Technical specifications of
the IM 151, digital and
analog electronic modules,
process-related modules
Order numbers for the
ET200S
ET 200S Distributed I/O
System
ET 200S Motor Starters
Installing and wiring motor
starters
Commissioning and
diagnostics of motor
starters
Technical specifications of
motor starters
Order numbers for motor
starters
IM 151/CPU addressing
ET 200S with IM 151/CPU in
the PROFIBUS network
Commissioning and
diagnostics of the
IM 151/CPU
Technical specifications of
the IM 151/CPU
List of STEP 7
instructions
To Next Page
Loading...
Need help?
General
