Siemens SIMATIC IM151-1 STANDARD User Manual

Interface module IM151-1 STANDARD (6ES7151-1AA06-0AB0)
Manual, 07/2015, A5E01075950-AD
5
Table of contents
Preface ................................................................................................................................................... 3
1 Properties ............................................................................................................................................... 7
2 Parameters ........................................................................................................................................... 12
2.1 Parameters for the IM151-1 STANDARD interface module ................................................... 12
2.2 Parameter description ............................................................................................................. 13
2.2.1 DP interrupt mode ................................................................................................................... 13
2.2.2 Bus length ............................................................................................................................... 13
2.2.3 Enable startup for set <> actual configuration ........................................................................ 13
2.2.4 Option handling in general ...................................................................................................... 13
2.2.5 Option handling: Slot 2 to 63 (with RESERVE module) ......................................................... 14
2.2.6 Diagnostic interrupt ................................................................................................................. 14
2.2.7 Process interrupt ..................................................................................................................... 14
2.2.8 Insert/remove-module interrupt ............................................................................................... 14
2.2.9 Analog-value format ................................................................................................................ 14
2.2.10 Interference frequency suppression ....................................................................................... 14
2.2.11 Reference junction slot ........................................................................................................... 15
2.2.12 Reference junction input ......................................................................................................... 15
3 Functions .............................................................................................................................................. 16
3.1 Option handling with RESERVE modules .............................................................................. 16
3.1.1 Principle of operation of option handling with RESERVE modules ........................................ 16
3.1.2 Prerequisites for option handling with RESERVE modules .................................................... 18
3.1.3 Example for using RESERVE modules .................................................................................. 19
3.1.4 Assigning parameters for option handling with RESERVE modules ...................................... 20
3.1.5 Controlling and monitoring options with RESERVE modules ................................................. 21
3.1.6 Troubleshooting for option handling with RESERVE modules ............................................... 23
3.1.7 Address area for option handling and status byte with RESERVE modules .......................... 24
3.2 Option handling without reserve modules............................................................................... 26
3.2.1 Principle of operation of option handling without RESERVE modules ................................... 26
3.2.2 Prerequisites for option handling without RESERVE modules ............................................... 27
3.2.3 Example for use without RESERVE modules ........................................................................ 28
3.2.4 Configuring option handling without RESERVE modules....................................................... 29
3.2.5 Controlling and monitoring options without RESERVE modules ............................................ 31
3.3 Identification data .................................................................................................................... 33

Siemens SIMATIC IM151-1 STANDARD Specifications

General

Brand	Siemens
Model	SIMATIC IM151-1 STANDARD
Category	Control Unit
Language	English