Interface module IM151-1 STANDARD (6ES7151-1AA06-0AB0)
Manual, 07/2015, A5E01075950-AD
7
The IM151-1 STANDARD interface module has the following properties:
● It connects the ET 200S with PROFIBUS DP via the RS485 interface.
● On SIMATIC S7 (in DPV1 mode), the maximum parameter length is 240 bytes per slot.
● The maximum address space is 244 bytes for inputs and 244 bytes for outputs.
● Operation as a DPV0 or DPV1 slave
● A maximum of 63 modules can be operated with the IM151-1 STANDARD.
● The maximum bus length is 2 m.
● Extended temperature range from 0 to 55°C with vertical installation.
● It supports option handling and the status byte for power modules.
● Firmware update over PROFIBUS DP with STEP 7
● Identification data (with DS248 or DS255)
● Direct data exchange (publisher)
The IM151-1 STANDARD interface module (6ES7151-1AA06-0AB0) replaces the
predecessor interface modules 6ES7151-1AA00-0AB0 to 6ES7151-1AA05-0AB0.
● For every 2DO AC24..230V electronic module used, the number of connectable I/O
modules in this station is reduced by one.
To Next Page
Loading...
Need help?
General
