Siemens SIMATIC NET RX1500 - Page 40

Power Supply Modules
2.4RUGGEDCOM RX1500PN PS 24P
Technical Specifications
Input Range 13 to 36 VDC
Internal Fuse Rating 10 A(T)
a
Maximum Power Consumption
b
63.5 W
Maximum Cable Length
c
9.4 m (30.8 ft)
Power
Insulation 1500 VDC for 1 minute
Environmental Operating Temperature -40 to 85 °C (-40 to 185 °F)
a
(T) denotes time-delay fuse.
b
Power consumption varies based on the device configuration.
c
Based on #16 AWG wiring.
Certification
This module has been certified to comply with the requirements of the following
standards.
Certification Details
European Union (EU) This module is marked with a CE marking and can be used
throughout the European community.
A copy of the CE Declaration of Conformity is available from
Siemens AG. For contact information, refer to "Contacting Siemens
(Page ix)".
RoHS This module is declared by Siemens AG to meet the requirements of
the following RoHS (Restriction of Hazardous Substances) directives
for the restricted use of certain hazardous substances in electrical
and electronic equipment:
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by
Electronic Information Products
A copy of the Material Declaration is available online at https://
support.industry.siemens.com/cs/ww/en/view/109738831.
Ordering Information
Description 24VDC (15-36VDC), European-style (Euroblock) terminal block
Article Numbers 6GK6015-0AL14-0AA0 (Standard)
6GK6015-0AL14-0AA1 (Conformal Coated)
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16
29