Power Supply Modules
2.7RUGGEDCOM RX1500PN PS HI
Installing the Module
For information about installing this module, refer to the Installation Manual for the
host device.
Technical Specifications
Input Range 88 to 300 VDC or 85 to 264 VAC
Internal Fuse Rating 3.15 A(T)
a
Maximum Power Consumption
b
65 W
Power
Insulation 2800 VDC for 1 minute
Operating Temperature -40 to 85 °C (-40 to 185 °F)
Operating Relative Humidity 5 to 95% (non-condensing)
Environment
Storage Temperature -40 to 85 °C (-40 to 185 °F)
a
(T) denotes time-delay fuse.
b
Power consumption varies based on the device configuration.
Certification
This module has been certified to comply with the requirements of the following
standards.
Certification Details
European Union (EU) This module is marked with a CE marking and can be used
throughout the European community.
A copy of the CE Declaration of Conformity is available from
Siemens AG. For contact information, refer to "Contacting Siemens
(Page ix)".
RoHS This module is declared by Siemens AG to meet the requirements of
the following RoHS (Restriction of Hazardous Substances) directives
for the restricted use of certain hazardous substances in electrical
and electronic equipment:
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by
Electronic Information Products
A copy of the Material Declaration is available online at https://
support.industry.siemens.com/cs/ww/en/view/109738831.
Ordering Information
Description 88-300VDC or 85-264VAC, screw terminal block
Article Numbers 6GK6015-0AL13-0AA0 (Standard)
6GK6015-0AL13-0AA1 (Conformal Coated)
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16
35
To Next Page
Loading...
