Required basic knowledge
This documentation is intended for personnel working in the fields of configuration,
commissioning, and service.
● Basic knowledge of the general use of the PC/programming device and of the use of the
Windows operating system is required.
● Knowledge of the functions and configurations of the following products:
– SIMATIC PCS 7
– SIMATIC S7 (S7-400, STEP 7)
– SIMATIC NET
– SIMATIC PDM
● Basic knowledge of the FOUNDATION Fieldbus is required.
● Knowledge of the structure of the FF Link operating instructions
Information for FF users
Users who have configured only FF up to now can acquire necessary knowledge of PCS 7
using the PCS 7 documentation. You can find an introduction to working with PCS 7 in the
SIMATIC; Process Control System PCS 7;
PCS 7 - Getting Started
manual.
Introduction
FOUNDATION Fieldbus
6 Commissioning Manual, 03/2013, A5E03880935-02
To Next Page
Loading...
