Siemens Simatic S7-1500R - Page 161

Dimensional drawing







① Position of the adapter frame during mounting to the standard DIN rail 35mmx7.5mm
② Position of the adapter frame during mounting to the standard DIN rail 35mmx15mm
Figure 6-5Dimensional drawing
Tools required
Wrench matching the hexagon socket head cap screw M6 according to ENISO4762
(DIN912).
Properties
● The standard rail adapter makes it possible to mount the S7-1500R/H mounting rail to the
standardized 35mm standard rails.
● The DIN rail adapter allows for the use of prefabricated control cabinet and terminal box
systems.
● The total length of the S7-1500R/H mounting rail can be used again completely as before.
161
Installation
6.3 Installing the standard rail adapter
S7-1500R/H redundant system
System Manual, 11/2022, A5E41814787-AD