Data Exchange with the SM 335
3-31
SM 335 – High-Speed Analog Input/Output Module for the SIMATIC S7-300
6ES7 335-7HG00-8BA1
Table 3-17 Interrupt triggered by comparator
Byte
Content
8 Cause of hardware interrupt (see Figure 3-10) = 2#0000 0010
9
1)
Comparator time [ms]
The comparator time is set in byte 10 of the parameter assignment data re-
cord DR1 (see Subsection 5.2.2).
10
1)
Low-order byte measuring value of Comparator 2
11
1)
High-order byte measuring value of Comparator 2
1) In comparator mode 0, bytes 9 to 11 are not assigned.
To Next Page
Loading...
