Siemens SIMODRIVE base line A User Manual

Introduction
1-2 SIMODRIVE base line A Start-Up
SIEMENS 1FK7 AC (4-pole pairs) servomotor is supplied to configure
with SIMODRIVE base line A. The major difference between
SIMODRIVE base line A and SIMODRIVE baseline is that
SIMODRIVE base line A is used with an adjustable combination of
1FK7 servo motors with 4-pole pairs resolver encoder, while the
SIMODRIVE base line is used with a fixed combination of 1FK7 servo
motors with 1-pole pair resolver encoder.
Fig. 1-2 SIMODRIVE base line A and CNC system
Notice:
The servo motors used in Simodrive base line are inapplicable for
Simodrive base line A.

Siemens SIMODRIVE base line A Specifications

General

Brand	Siemens
Model	SIMODRIVE base line A
Category	Controller
Language	English