Siemens SIMODRIVE POSMO A

5
5.6 Parameters for SIMODRIVE POSMO A
5-216
 Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
P0048 / 30 Actual traversing block, block number
300W 075W
Min Standard Max Unit Data type Effective
––––I2RO
The parameter specifies the block number of the traversing block presently being processed.
P0049 / 31 Following block, block number
300W 075W
Min Standard Max Unit Data type Effective
––––I2RO
The parameter specifies the block number of the next block.
The following block is the next traversing block to be executed.
P0050 / 32 Velocity setpoint
300W 075W
Min Standard Max Unit Data type Effective
– – – MSR/min I4 RO
P0051 / 33 Actual velocity
300W 075W
Min Standard Max Unit Data type Effective
– – – MSR/min I4 RO
P0052 / 34 Hardware version
300W 075W
Min Standard Max Unit Data type Effective
––––I4RO
The parameter indicates the hardware version of the motor.
= 1 ––> Hardware version A
= 4 ––> Hardware version D, etc.
P0053 / 35 Firmware version
300W 075W
Min Standard Max Unit Data type Effective
––––I4RO
The parameter indicates the firmware version of the drive.
Example:
= 10202 ––> Firmware version 01.02.02
5 Description of the Functions
02.9904.0108.06