Siemens SIMOTICS S-1FK2 - Page 38

If the ambient temperature exceeds 40 °C, you need to set the ambient temperature on the
converter.
• To do this, select parameter p0613 at the converter, and set the maximum ambient
temperature that occurs.
Parameter r0034 indicates the thermal load of the motor as a percentage. The reading is
in󹪞uenced by the ambient temperature selected in parameter p0613.
You can 󹪝nd more information in the manual for the converter.
Mechanical properties
3.1 Cooling
1FK2 Synchronous Motors for SINAMICS S120
36 Con󹪝guration Manual, 02/2022, A5E46927724B AD