Siemens SIMOTICS S-1FK2 - Configuration; Configuring Software; SIZER Configuration Tool

Con󹪝guration
5
5.1 Con󹪝guring software
5.1.1 SIZER con󹪝guration tool
Overview
The SIZER calculation tool supports you in the technical dimensioning of the hardware and
󹪝rmware components required for a drive task.
SIZER supports the following con󹪝guration steps:
• Con󹪝guring the power supply
• Designing the motor and gearbox, including calculation of mechanical transmission
elements
• Con󹪝guring the drive components
• Compiling the required accessories
• Selection of the line-side and motor-side power options
The con󹪝guration process produces the following results:
• A parts list of components required (Export to Excel)
• Technical speci󹪝cations of the system
• Characteristic curves
• Comments on system reactions
• Installation information of the drive and control components
• Energy considerations of the con󹪝gured drive systems
You can 󹪝nd additional information that you can download in the Internet at SIZER (
https://
support.industry.siemens.com/cs/document/54992004/sizer-for-siemens-drives?
dti=0&pnid=13434&lc=en-WW).
1FK2 Synchronous Motors for SINAMICS S120
Con󹪝guration Manual, 02/2022, A5E46927724B AD 65