Siemens SIMOTICS S-1FK2 - Preparation for Use; Transporting

Preparation for use
7
7.1 Transporting
Note
Comply with the local national regulations for the transportation of motors.
Precondition
• Use suitable load suspension devices when transporting and installing the motor.
• Do not lift the motor by the connector.
• Transport the motor carefully.
Procedure for lifting and transporting using slings
You can lift and transport the motor using lifting slings.
WARNING
Incorrectly dimensioned or incorrectly used lifting slings
If lifting slings are incorrectly dimensioned or incorrectly used, the motor can fall and cause
death, severe injury and/or damage to property.
• Only use lifting slings that are suitable for the weight of the motor.
• Attach the lifting slings as shown in the 󹪝gure "Lifting and transporting with lifting slings".
1FK2 Synchronous Motors for SINAMICS S120
Con󹪝guration Manual, 02/2022, A5E46927724B AD 129