Siemens SIMOTICS S-1FK2 - Introduction

Introduction
About this Con󹪝guration Manual
This Con󹪝guration Manual is applicable for 1FK2.
When the 1F☐2 product name is used in this manual, the associated data apply equally to 1FT2
and 1FK2.
Recommended documents
Additional documents
For con󹪝guring, you require a Catalog NC 82 (
https://support.industry.siemens.com/cs/ww/en/
view/109746977) as printed version or online.
Target group
This documentation addresses project planners and project engineers as well as machine
manufacturers and commissioning engineers.
Bene󹪝ts
The Con󹪝guration Manual enables the target group to apply the rules and guidelines to be
observed when con󹪝guring products and systems.
The Con󹪝guration Manual supports you with selecting motors, calculating the drive
components, and selecting the required accessories. The Con󹪝guration Manual helps the target
group to create a system or plant con󹪝guration.
Utilization phase
Planning and con󹪝guration phase
More information
Information on the following topics is available at:
• Additional links to download documents
• Using documentation online (󹪝nd and search in manuals / information)
More information (https://support.industry.siemens.com/cs/de/en/view/108998034)
1FK2 Synchronous Motors for SINAMICS S120
Con󹪝guration Manual, 02/2022, A5E46927724B AD 3