Interfaces
3.2 Ethernet interface
SIMOTION C
36 Operating Instructions, 02/2012
3.2 Ethernet interface
Definition
Interface for connecting an Industrial Ethernet.
Industrial Ethernet is a communication network with a transmission rate of 10/100 Mbit/s.
The SIMOTION C provides the following functions via the Ethernet interface:
● Communication with STEP 7 and SIMOTION SCOUT
● Communication with distributed I/O (e.g. SIMATIC HMI)
● Communication between SIMOTION and SIMATIC NET OPC
The "SIMATIC NET SOFTNET S7 (S7 OPC server)"
software must be installed on the PG/PC for this function.
Note:
SOFTNET-S7 is a superset of SOFTNET-PG, i.e. SOFTNET-S7 contains Protocol
TPC/IP RFC 1006 as well.
For more information about the software packages, see
SIMOTION Motion Control System
,
PM 21 Catalog. This documentation is supplied in electronic format with SIMOTION SCOUT.
Connectable devices
A PG/PC can be connected to the Ethernet interface via a Fast Ethernet network. The PG
must be equipped with an Ethernet card and the corresponding software must be available.
To Next Page
Loading...
Need help?
General
