Technical data
10.4 Mechanical and climatic environmental conditions for operation of the SIMOTION C
SIMOTION C
180 Operating Instructions, 02/2012
10.4 Mechanical and climatic environmental conditions for operation of
the SIMOTION C
Use conditions
The SIMOTION C is designed for use in a stationary, weather-protected installation.
The SIMOTION C satisfies the operating conditions for Class 3C2 in accordance with DIN
EN 60721 3-3 (operating locations with high traffic densities and in the immediate vicinity of
industrial equipment with chemical emissions).
The SIMOTION C must not be used in the following locations without additional measures
being taken:
● Locations with a high percentage of ionizing radiation
● Locations with severe operating conditions, e.g. due to:
– Dust accumulation
– Corrosive vapors or gases
● Installations requiring special monitoring, such as:
– Elevator installations
– Electrical installations in highly sensitive areas
An additional measure for the use of the SIMOTION C could be installation in a cabinet, for
example.
To Next Page
Loading...
