Connecting
5.1 Wiring
SIMOTION C
Operating Instructions, 02/2012
99
The setpoint and measuring system cables (see figure "Overview of connections" ) are
available in various lengths.
See
PM 21 Catalog / NC 60 Catalog / ST 70 Catalog / CA 01 Catalog
For information about the PROFIBUS cable or Ethernet bus cable, see chapter Networking
(Page 122).
For ad
ditional information about PROFIBUS DP, PROFINET IO and Ethernet, see
IK PI
Catalog
Front connector
For the wiring of the digital inputs/digital outputs, you need a 40-pole front connector (screw
type or spring tension type). This must be ordered separately.
Order no.: Screw type 6ES7 392-1AM00-0AA0
Spring type 6ES7 392-1BM01-0AA0
See
ST 70 catalog/NC 60 catalog
To Next Page
Loading...
Need help?
General
